Premium Paver Sealing · Northeast Florida

PAVER SEALING DONE RIGHT

The Gold Standard, Every Time.

Meticulous preparation, joint angular sand, and a sealer system engineered for Florida sun, salt air, and summer storms. Our paver sealing is guaranteed — not sprayed and prayed.

Request Your Quote
BBB A Rating
More than a century of combined expertise
St. Johns · Duval · Nassau
Fully guaranteed work

Why FCPE paver sealing is different

Process-first, not product-first.

Most paver sealing in Northeast Florida is a weekend job with a pump sprayer. Ours isn’t. Every project starts with deep cleaning, joint rework with angular sand, and material-specific sealer selection. We stand behind it because we built it right.

Deep clean first

Surface-appropriate pressure, rotary cleaning where needed, stain lift on oil, rust, and organics. The sealer only works as well as the prep.

Joint angular sand

We re-sand every joint with the correct joint angular sand for your paver system. We do not use joint angular sand.

Sealer matched to surface

Regular pavers, travertine, flagstone, bluestone — each needs a different sealer system. We carry all of them.

Guaranteed outcome

If the seal doesn’t hold as promised, we come back. No arguments. That’s the Gold Standard.

Our sealing process

Five steps. No shortcuts.

01

Assessment

On-site or virtual walk-through. We measure the area, note the paver material, check for existing sealer, and flag any repairs.

02

Deep clean

Power wash with the correct pressure and detergent for your surface. Stain lift where needed. Full dry time before sand.

03

Re-sand joints

Joint angular sand swept in, compacted, and settled. This is where most contractors cut corners — and where sealer systems fail.

04

Seal

Material-matched sealer system applied per manufacturer spec. Two coats where called for. Cure time protected from foot and pet traffic.

05

Final walk

We inspect every square foot with you, document the completed work, and leave your care instructions. Guarantee is active from that moment.

Related services

Your paver system, fully cared for.

Sanding & Sealing Hub

All surfaces — brick, travertine, flagstone, concrete, bluestone, pool deck, driveways. View every surface →

Driveway & Concrete

Driveway cleaning, concrete restoration, expansion-joint care. Driveway & concrete →

Patios & Lanais

Outdoor living surfaces cleaned and protected for year-round use. Patios & lanais →

Pool Decks

Coolest-possible-touch sealers that stop algae and chlorine damage. Pool deck sealing →

Paver sealing FAQ

What Florida homeowners ask us most.

How long does paver sealer last in Florida?

A properly applied, material-matched sealer holds for 3–5 years on horizontal pavers in Northeast Florida sun and salt. Pool decks and driveways near coastal salt air are on the shorter end; covered lanais are on the longer end. We document the exact sealer used on your property so re-seal scheduling is simple.

Do you use joint angular sand?

No. FCPE uses joint angular sand on every paver project. Joint angular sand settles, compacts, and breathes — which is what your paver system was designed for.

What’s the difference between your service and a typical spray-and-seal?

Most contractors skip the joint work and go straight to sealer. That traps dirt, fails to lock the paver bed, and creates the cloudy white “blushing” that ruins patios within a year. We deep-clean, re-sand with joint angular sand, and then seal. It takes longer. It also lasts.

Can you strip failed sealer from a previous contractor?

Yes. Sealer stripping is an add-on service that removes failed sealer, cloudy film, or peeling finishes before we start fresh. We quote it by the square foot after inspection.

What surfaces do you seal?

Regular concrete pavers, travertine, flagstone, bluestone, brick, pool decks, driveways, patios, lanais, and more. Each surface gets a different sealer system matched to its porosity and exposure. See our Sanding & Sealing hub for the full list.

How do I get a quote?

Request your estimate here or call (904) 466-1622. We’ll measure the area, identify the surface, and give you a firm project investment — no hidden fees, no pressure.

Ready to protect your pavers?

The Gold Standard, Every Time.

Request Your Quote

Continue Reading

From Our Field Notes.

Every post is written by the crew that does the work — not a copywriter working from a brief. Here’s what we’re seeing on estates this season.

Start Your Estimate

— The Gold Standard, Every Time.

HOA-Ready Service. HOA-conscious scheduling and arrival protocols are standard practice in the communities we serve. We coordinate around community access requirements, contractor parking rules, and arrival windows before the first visit. Communicate your community’s specific requirements at booking and we will confirm them before we arrive.